Application
This antibody stained formalin-fixed, paraffin-embedded sections of human breast invasive ductal carcinoma. The recommended concentration is 10.0 ug/ml with an overnight incubation at 4˚C. An HRP-labeled polymer detection system was used with a DAB chromogen. Heat induced antigen retrieval with a pH 6.0 sodium citrate buffer is recommended. Optimal concentrations and conditions may vary. Tissue saApplication
This antibody stained formalin-fixed, paraffin-embedded sections of human breast invasive ductal carcinoma. The recommended concentration is 10.0 ug/ml with an overnight incubation at 4˚C. An HRP-labeled polymer detection system was used with a DAB chromogen. Heat induced antigen retrieval with a pH 6.0 sodium citrate buffer is recommended. Optimal concentrations and conditions may vary. Tissue saApplication
This antibody stained formalin-fixed, paraffin-embedded sections of human breast invasive ductal carcinoma. The recommended concentration is 10.0 ug/ml with an overnight incubation at 4˚C. An HRP-labeled polymer detection system was used with a DAB chromogen. Heat induced antigen retrieval with a pH 6.0 sodium citrate buffer is recommended. Optimal concentrations and conditions may vary. Tissue saApplication
To detect hMCP-1 by Western Blot analysis this antibody can be used at a concentration of 0.20-0.40 ug/ml. Used in conjunction with compatible secondary reagents the detection limit for recombinant hMCP-1 is 1.0-2.0 ng/lane, under reducing or non-reducing conditions.Application
To detect hMCP-1 by Western Blot analysis this antibody can be used at a concentration of 0.20-0.40 ug/ml. Used in conjunction with compatible secondary reagents the detection limit for recombinant hMCP-1 is 1.0-2.0 ng/lane, under reducing or non-reducing conditions.Application
To a sandwich ELISA (assuming 100µl/well), a concentration of 2.0-4.0 ug/ml of this antibody will detect at least 300 pg/ml of recombinant human MCP-1 when used with ProSci's biotinylated antigen affinity purified anti-human MCP-1 (XP-5218Bt) as the detection antibody at a concentration of approximately 0.5-1.0 ug/ml.| Product Name | MCP-1 Antibody [2.2-4H5-01A11] |
|---|---|
| Antibody Type | Primary Antibodies |
| Immunogen | The monoclonal antibody was produced in BALB/c X ICR F1 mice using recombinant hMCP-1/MCAF as the immunizing antigen. |
| Clonality | Monoclonal |
|---|---|
| Host Species | Mouse |
| Tested Applications | ELISAWB |
| ELISA: In a sandwich ELISA (assuming 100 μL/well), a concentration of 2.0-4.0 μg/mL of this antibody will detect at least 300 pg/mL of recombinant human MCP-1 when used with our biotinylated antigen affinity purified anti-human MCP-1 (XP-5218Bt) as the detection antibody at a concentration of approximately 0.5-1.0 μg/mL. Western Blot: To detect hMCP-1 by Western Blot analysis this antibody can be used at a concentration of 0.20-0.40 μg/mL. Used in conjunction with compatible secondary reagents the detection limit for recombinant hMCP-1 is 1.0-2.0 ng/lane, under reducing or non-reducing conditions. | |
| Species Reactivity | Human |
| Concentration | 1mg/ml |
| Purification | Affinity purified |
| Gene Symbol | CCL2 |
|---|---|
| Alternative Names | MCP1 SCYA2 C-C motif chemokine 2 HC11 MCAF MCP-1 GDCF-2 SMC-CF HSMCR30 |
Application
This antibody stained formalin-fixed, paraffin-embedded sections of human breast invasive ductal carcinoma. The recommended concentration is 10.0 ug/ml with an overnight incubation at 4˚C. An HRP-labeled polymer detection system was used with a DAB chromogen. Heat induced antigen retrieval with a pH 6.0 sodium citrate buffer is recommended. Optimal concentrations and conditions may vary. Tissue sa
Application
This antibody stained formalin-fixed, paraffin-embedded sections of human breast invasive ductal carcinoma. The recommended concentration is 10.0 ug/ml with an overnight incubation at 4˚C. An HRP-labeled polymer detection system was used with a DAB chromogen. Heat induced antigen retrieval with a pH 6.0 sodium citrate buffer is recommended. Optimal concentrations and conditions may vary. Tissue sa
Application
This antibody stained formalin-fixed, paraffin-embedded sections of human breast invasive ductal carcinoma. The recommended concentration is 10.0 ug/ml with an overnight incubation at 4˚C. An HRP-labeled polymer detection system was used with a DAB chromogen. Heat induced antigen retrieval with a pH 6.0 sodium citrate buffer is recommended. Optimal concentrations and conditions may vary. Tissue sa
Application
To detect hMCP-1 by Western Blot analysis this antibody can be used at a concentration of 0.20-0.40 ug/ml. Used in conjunction with compatible secondary reagents the detection limit for recombinant hMCP-1 is 1.0-2.0 ng/lane, under reducing or non-reducing conditions.
Application
To detect hMCP-1 by Western Blot analysis this antibody can be used at a concentration of 0.20-0.40 ug/ml. Used in conjunction with compatible secondary reagents the detection limit for recombinant hMCP-1 is 1.0-2.0 ng/lane, under reducing or non-reducing conditions.
Application
To a sandwich ELISA (assuming 100µl/well), a concentration of 2.0-4.0 ug/ml of this antibody will detect at least 300 pg/ml of recombinant human MCP-1 when used with ProSci's biotinylated antigen affinity purified anti-human MCP-1 (XP-5218Bt) as the detection antibody at a concentration of approximately 0.5-1.0 ug/ml.| Application Notes | ELISA: In a sandwich ELISA (assuming 100 μL/well), a concentration of 2.0-4.0 μg/mL of this antibody will detect at least 300 pg/mL of recombinant human MCP-1 when used with our biotinylated antigen affinity purified anti-human MCP-1 (XP-5218Bt) as the detection antibody at a concentration of approximately 0.5-1.0 μg/mL. Western Blot: To detect hMCP-1 by Western Blot analysis this antibody can be used at a concentration of 0.20-0.40 μg/mL. Used in conjunction with compatible secondary reagents the detection limit for recombinant hMCP-1 is 1.0-2.0 ng/lane, under reducing or non-reducing conditions. |
|---|
| Form | Liquid |
|---|---|
| Storage Instructions | MCP-1 lyophilized antibody is stable at room temperature for at least one month and for greater than a year when kept at -20˚C. Reconstitute in sterile water to a concentration of 0.1 - 1.0 mg/mL. The antibody is stable for at least six weeks at 2-4˚C when reconstituted. |
| Storage Buffer | phosphate buffered saline , pH 7.4, 150mM NaCl, 0.02% sodium azide and 50% glycerol. |
